Guitar Components

GUITAR


Necks

All available neck sizes and shapes.


Guitar Pick-ups

“The best sounding pick-ups I’ve ever heard!”
Marc Cooper, US Digitech artist.

“Your Manne Blades MiniHumbucker is a beast! Cuts through the mix like nothing.”
Horst Keller, German Line6 artist

Manne Blades Minihumbuckers and Humbuckers
These pick-ups are hand-wound directly on the blade rather than on bobbins. This gives the pickup an extraordinary sensitivity to playing nuances. The tone is more “musical” and highlights your touch with great dynamic extension. The two coils can be connected in series or parallel, giving you two calibrated sounds: a fatter and warm sound when connected in serias and a brighter, sharper sound when in parallel. Compared to the usual split/coil, the series-parallel wiring always use both coils, so it will always perform noise cancellation, being in humbucking mode in both cases. (Blades’ infos)
M
Humbuckers front rear
Resistance 8.0K 9.36 K
Inductance 2,2 H 2,0 H
Reference tone chart: signal signal
Bass 80hz 15 12
Mid low 500hz 9 10
Mid 1khz 9 10
Mid hi 2khz 8 8
Treble 8khz 8 10
H
Resistance 11.7K
Inductance 2.3 H
Reference tone chart: signal
Bass 80hz 10
Mid low 500hz 10
Mid 1khz 10
Mid hi 2khz 10
Treble 8 khz 8
S Single Vintage Alnico V
Resistance 6.2K
Inductance 3.19 H
Reference tone chart: signal
Bass 80hz 10
Mid low 500hz 8
Mid hi 2khz 10
Treble 8 khz 10

White version available for Raven models

SB SB Pickups for 7 – up to 10 strings

These humbucker pickups are ideal to cover the tonal response of instruments from 7 strings up to 10 strings. The bar polar expansion makes them suitable to any strings spacing. The two coils can be connected in series or parallel.

We developed a specific preamp to work in conjunction with these pickups, to let them work in standard ceramic classic tone and output mode, or to let them increase the volume output and frequency range making them sound more like classic active pickups.


Piezo Pick-up

PZ

Used on: Acoustibass and Semiacustica

The piezo pick-up we use is specially handmade for us. It has a superior performance, with a linear response that lets us use it on all our piezo instruments as Acoustibass, Semiacustica, Nylon Semiacustica, and we use it also on acoustic and classic guitars.

pwrc= 0,45 mA 20%.
banwidth: 2 Hz – 200 kHz with 100kOhm / 30 pF and 100 mVrms output voltage.
Noise: 132 dB / 1V non filtered and 142 dB / 1V class A filter.
Distortion: 20 Hz – 20 kHz less than 0,1%.
Loads/elec. side: > 10 kOhm / 1000 pF.


Guitar Bridges

Top Hardware

W W Wilkinson Bridge:
VG300 with steel saddles, base and block. 2 screw pivots. Steel bended saddles add a “sparkle” to sound of this bridge. Finish: Chrome
LPM - Manne Stop Tailpiece Handmade by Manne T.L.M. guitar hardware. In crude, cold rolled steel.

- Manne Tailpiece Screws, modified to screw the tailpiece firmly against the body top, to optimize sound transmission.

- Manne Bridge Lock enables to lock the bridge in its position, securing it to the screws and optimizing sound transmission.

Instructions

Finish: Chrome and Cosmo Black

FG FG Floyd Gotoh Bridge

We started using this bridge since its introduction in 1996, that’s where its codename comes from. We consider it a superior Floyd-style bridge, superior in material and in tone as it is less metallic and less tone killing than other floyds.

Available in Black finish only.

NT Manne NT6 nontremolo bridge for 6 string guitars,
handmade by Manne T.L.M. guitar hardware developement. In crude, cold rolled steel.Manne NT7 nontremolo bridge for 7 strings guitars,
handmade by Manne T.L.M. guitar hardware developement. In crude, cold rolled steel.NT8 Manne nontremolo bridge for 8 strings
handmade by Manne T.L.M. guitar hardware developements. In crude, cold rolled steel.

Standard Hardware

LP LP Standard Bridge

Top construction and classic features and sound.

- Manne customized standard stop-tailpiece is modified to let it lay flat on the guitar body.

- Manne tailpiece screws, modified to screw the tailpiece firmly against the body top to optimize sound transmission.

Finish: Chrome and Cosmo Black

Also available: LP7 for seven string guitars.

ST WA Wraparound Bridge

Lightweight and with fine compensation adjustments.

Finish: Chrome

F F Bridge

Floyd Rose Double Locking, thick casting plate, Licensed under Floyd Rose
Fingertip arm tension adjustment – fine tuner
Plain-end string mounting
43.0 mm locking nut
Die-cast baseplate with hardness pivot-edge inserts. Includes arm, locking nut, studs, bushings, springs, spring claw hook and allen wrenches. Available in Black finish only.

Finish: Black

F7 F7 Bridge

Floyd Rose Double Locking Casting plate, Licensed under Floyd Rose
Fingertip arm tension adjustment – fine tuner
Plain-end string mounting
43.0 mm locking nut
Die-cast baseplate. Includes arm, locking nut, studs, bushings, springs, spring claw hook and allen wrenches.

Finish: Black

SV SV Bridge

Standard vibrato with steel saddles and aluminum block. Good, consistent tone. Increased tuning stability due to side saddle positioning borders. Available in Chrome finish only.

Finish: Chrome

TV TV Wilkinson WV6 SB

5+1 unique Wilkinson knife/edge system to get the best from the 6 pivot set-up. Vintage style and sound. Solid steel sustain block.

Finish: Chrome

TL Tele Bridge Classic

Finish: Chrome

WV Contemporary Wilkinson WVP SB

Finish: Chrome


Guitar Tuners

Top Hardware

TMG Used on: TAOS together with the Gotoh VG300 bridge.

Autolocking Manne tuners

Finish: Chrome and Cosmo Black

Standard Hardware

TML Used on: Raven-Ventura

Manne Chrome Tuner

Good quality, light and reliable.

Finish: Chrome and Cosmo Black


Guitar Circuit

P Volume, Tone, Selector.
Volume pushpull for series/parallel on neck pick-up and Tone pushpull for series/parallel on bridge pickup