Manne Guitars - Components page

Pick-up chitarra

MANNE BLADE Pick-ups (mH - H)
They are wound by hand directly on the blade instead of on bobbins. This gives the pickup extraordinary sensitivity to playing nuances. The tone is more "musical" and highlights your touch with great dynamic extension.

The two coils can be connected in serie or parallel giving you two calibrated sounds: the fatter and warm sound when in serial connection and a brighter sharper sound when in parallel. Compared to the usual split/coil, the serie-parallel always use both coils, so it will always perform noise cancellation, being in humbucker mode on both connections.

"The best sounding pick-ups I've ever heard!"
Marc Cooper, dimostratore americano Digitech.

"Your Manne Blades MiniHumbucker is a beast! Cuts through the mix like nothing."
Horst Keller, dimostratore tedesco Line6

mH -H Manne blades minihumbuckers ed Humbuckers
Pick-ups sviluppati appositamente per i nostri strumenti, hanno una maggiorata sensibilità al tocco, con una sonorità bilanciata e musicale buona per svariate esigenze. Collegabili in serie e parallelo offrono suono brillante da single coil che quello da humbucker in versione hum-free. Quando è l' espressività ed il "tocco" il focus del vostro modo di suonare, questi pick-up sono la vostra scelta ideale.

Minihumbuckers mH
Resistance	11.7K
Inductance	2.3 H
Reference tone chart:		signal
Bass	80hz	10
Mid low	500hz	10
Mid	1khz	10
Mid hi	2khz	10
Treble	8 khz	8
Humbuckers H		front	rear
Resistance		8.0K	9.36 K
Inductance		2,2 H	2,0 H
Reference tone chart:		signal	signa
Bass	80hz	15	12
Mid low	500hz	9	10
Mid	1khz	9	10
Mid hi	2khz	8	8
Treble	8khz	8	10

SA Single vintage alnico V

D.C. Ohm: 6,20K
Inductance (L): L3,19

Reference tone chart:	signal
Bass	10
Mid low	8
Mid hi	10
Treble	10

Disponibile in versione bianca per i modelli Raven

HA Humbuckers Alnico

D.C.Ohm(k) : 16.42 K,
Inductance(L) : 8.71

Reference tone chart:	signal
Bass	12
Mid low	10
Mid hi	12
Treble	12

HCHumbuckers Ceramici

D.C.Ohm(k) : 16.41,
Inductance(L) : 8.83

Reference tone chart:	signal
Bass	12
Mid low	10
Mid hi	9
Treble	9

HC7 Humbucker distortion 7
Pole-pieces type : Fixed
Magnet : Ceramic bar
Bobbin : 2pcs of Plastic bobbins
Cable : Two conductor with shield
Bottom plate : Yes
R : Bridge position
F : Neck position

Bridge: D.C.Ohm(k) : 8.48, Inductance(L) : 4.54
Tone chart(Low):11,(mid-low):11
(mid-high):12, (high):10
Proper Screws:1,2

Ponti per Chitarra STANDARD HARDWARE
s	LG Gotoh LP bridge lightweight, hollow body. All saddles and all adjustment are lockable into desidered position. Bright-open sounding. Available just black.
	LP Standard Bridge Top construction and classic features and sound. LP7 per sette corde
	WA Wraparound Bridge Lightweight and with fine compensation adjustments.
	FL Bridge Floyd Rose Double Locking, thick Casting plate, Licensed under Floyd Rose Fingertip arm tension adjustment - fine tuner Plain-end string mounting 43.0 m/m locking nut Die-cast Base plate with Hardness pivot-edge inserts Include arm, locking nut, studs, bushings, springs, spring claw hook and allen wrenches. Available just black
	FL7 Bridge Floyd Rose Double Locking Casting plate, Licensed under Floyd Rose Fingertip arm tension adjustment - fine tuner Plain-end string mounting 43.0 m/m locking nut Die-cast Base plate Include arm, locking nut, studs, bushings, springs, spring claw hook and allen wrenches. Available just black.
	SV Bridge Standard vibrato with steel saddles and aluminum block. Good, consistent tone. Increased tuning stability due to side saddle positioning borders. Available just chrome.
	TV Wilkinson WV6 SB 5+1 unique wilkinson knife edge system to get from the 6 pivot set-up its best. Vintage style and sound. Solid steel sustain block.
Guitars Bridges TOP HARDWARE
	LPM6 Manne Stoptailpiece Handmade by Manne T.L.M. guitar hardware. In crude, cold rolled steel
	NT7 Manne nontremolo bridge for 7 strings handmade by Manne T.L.M. guitar hardware developements. In crude, cold rolled steel NT6 Disponibile anche per 6 corde In crude, cold rolled steel
	NT8 Manne nontremolo bridge for 8 strings handmade by Manne T.L.M. guitar hardware developements. In crude, cold rolled steel
	FG Floyd Gotoh Bridge Usiamo questo ponte sin dalla sua introduzione (1996), considerandolo il ponte floyd con la migliore meccanica e resa acustica. Disponibile in finitura Cosmo Black
	WS Wilkinson Bridge: VS300 with steel saddles, base and block. 2 screws pivots. Steel bended saddles add a "sparkle" to sound of this bridge. Available just in Chrome finish.

Pick-up piezo

Used on: Acoustibass and semiacustica

Il piezo da noi usato è di costruzione artigianale, di qualità superiore e performance di gran lunga superiore ad altri piezo sul mercato. La risposta è lineare e distante dal tipico suono associato ad i pickup piezo e ci permette di usare lo stesso pickup sia sulle nostre semiacustiche e semiacustiche corde in nylon, sugli acoustibass e sui basic piezo e che usiamo anche come retrofit su chitarre acustiche da amplificare.

Potenza assorbita = 0,45 mA +/- 20%.
Larghezza di banda: 2 Hz - 200 kHz con 100kOhm / 30 pF e 100mVrms di tensione d'uscita.
Rumore : 132 dB / 1V non filtrato e 142dB / 1V filtro classe A ( classe di udibilità).
Distorsione: Nel campo 20 Hz - 20 kHz la distorsione è inferiore allo 0,1%.
Carichi/ Terminale della parte elettronica: > 10 kOhm / 1000 pF.

Pick-ups basso
Used on: Trea	J-CD (covered) model Powerful Alnico Jazz bass sound Pole-Pieces type : Fixed Magnet : Alnico rod Bobbin : Fiber materials Cable : Two conductor cloth Edge cutting : Yes 4 strings bridge D.C.Ohm(k) : 7.95, Inductance(L) : 3.57, Pole pieces Spacing : 19.4 m/m Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):9 4 strings neck D.C.Ohm(k) : 7.60, Inductance(L) : 3.44, Pole pieces Spacing : 18.6 m/m Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):9 5 strings bridge: D.C.Ohm(k) : 6.65, Inductance(L) : 3.63 Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):9 5 strings neck: D.C.Ohm(k) : 6.45, Inductance(L) : 3.53 Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):9
Used on: Moab and Newport with MM humbucker	S Model We use this pickup just in neck position Powerful Cermic Jazz bass sound Fixed pole pieces Single coil wiring Fiber material bobbin Ceramic Magnet Bar Pole pieces Spacing : 16.8 m/m Two conductor with shield 200 m/m length 4 strings: Pole-Pieces type : Fixed D.C.Ohm(k) : 3.97, Inductance(L) : 3.59 Tone chart(Low):11,(mid-low):10 (mid-high):10, (high):11 5 corde: D.C.Ohm(k) : 5.25, Inductance(L) : 5.42 Tone chart(Low):11,(mid-low):10 (mid-high):10, (high):11
Used on: Soulmover, Raven	J alnico model Powerful Alnico Jazz bass sound Pole-Pieces type : Fixed Magnet : Alnico rod Bobbin : Fiber materials Cable : Two conductor cloth Edge cutting : Yes 4 strings bridge D.C.Ohm(k) : 7.95, Inductance(L) : 3.57, Pole pieces Spacing : 19.4 m/m Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):10 4 strings neck D.C.Ohm(k) : 7.60, Inductance(L) : 3.44, Pole pieces Spacing : 18.6 m/m Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):10 5 strings bridge: D.C.Ohm(k) : 6.65, Inductance(L) : 3.63 Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):10 5 strings neck: D.C.Ohm(k) : 6.45, Inductance(L) : 3.53 Tone chart(Low):10,(mid-low):11 (mid-high):11, (high):10 P alnico model Pole-Pieces type : Fixed Magnet : Alnico Bobbin : Fiber materials Cable : Two conductor cloth Edge cutting : Yes Position : Neck and Bridge Hum cancel wiring D.C.Ohm(k) : 8.04, Inductance(L) : 3.89, Pole pieces Spacing : 19.0 m/m Tone chart(Low):12,(mid-low):10 (mid-high):10, (high):11
Used on: Moab and Newport	MM model Pole-pieces type : Fixed Magnet : Alnico rods Bobbin : Fiber materials Cable : Four conductor with shield Bottom plate : N/A Position : Neck and Bridge 4 strings: D.C.Ohm(k) : 4.66, Inductance(L) : 1.98 Tone chart(Low):12,(mid-low):11 (mid-high):11, (high):14 5 strings: D.C.Ohm(k) : 5.80, Inductance(L) : 2.34 Tone chart(Low):12,(mid-low):13 (mid-high):13, (high):14 6 corde: D.C.Ohm(k) : 6.12, Inductance(L) : 2.55 Tone chart(Low):14,(mid-low):13 (mid-high):13, (high):14
Used on: Acoustibass or on request on Moab	SB Bass Humbuckers BT4 / BT5 / BT6 Powerful Ceramic bass sound Hum cancel wiring Ceramic Magnet Bar Maximum string Spacing : 4 strings: 90.00 m/m 5 strings: 91.75 m/m 6 strings: 79.00 m/m
Used on: six strings	XLJ model Powerful Ceramic Jazz bass sound Single coil wiring Maximum string Spacing : 111.0 m/m Two conductor with shield 200 m/m length Pole-Pieces type : Steel bar Magnet : Ceramic bar Bobbin : Plastic Cable : Two conductor with shield Epoxy molding type Position : Neck and Bridge D.C.Ohm(k) : 8.50, Inductance(L) : 1.77 Tone chart(Low):11,(mid-low):9 (mid-high):8, (high):8

Ponti per basso STANDARD HARDWARE
Used on: Newport	TC Classic Bass bridge Available for 4 and 5 strings just with Chrome finish. Used on our Newport plain Models.
Used on: Raven	Wilkinson WBBC Perfect reproduction of vintage barrel bridge style with Brass saddles.
Ponti per basso TOP HARDWARE
Used on: Trea, Basic, Newport Special and Soulmover Active.	MB-MC Manne Bass bridges Available for 4 strings (gold, chrome and black), 5 strings (chrome and black) and 6 strings (just black). The saddles has hardened material, 3D adjustable and lockable. Solid Brass body. Is possible to have string thru the body or standard. Original string entrance groove. This bridge enanches harmonics and sustain. It gives a better transmission of vibrations to the body of the instrument. Code: MB black; MC chrome
Used on: Acoustibass	PZ Manne Piezo bridge aluminum body with brass saddles. saddles gives indipendent pressure on piezo and are precisely build to match our fingerboard radius specification. Available for 4, 5 or 6 strings.

Circuito attivo per basso

3-band active/passive switchable (at the volume push/pull), balance-pot with dip in center-position, treble-pot in active mode +/- 18 dB@18 KHz, in passive mode acting as classical highcut, bass +/- 14 dB@40 Hz, mid +/- 9 dB@550 Hz, battery-connection 9 volts.

Due to the high performance electronic, in flat position of the eq you can hear no difference between active and passive mode!

Controlli: Volume push/pull per attivo (posizione normale) o passivo (posizione sollevata); Balance dei pick-ups (con scattino centrale); acuti, medi, bassi con scatto centrale nella posizione di flat.
Nella posizione di circuito passivo (pot volume alzato), il tono degli acuti funziona come tono passivo dalla posizione di flat (centrale) verso il lato del taglio (in senso antiorario).

MOAB-NEWPORT Circuit

TREA Circuit

Meccaniche per chitarra STANDARD HARDWARE
Used on: Raven-Ventura	Manne Meccanica cromata Ottima qualità, affidabile e leggera. disponibile anche a finitura Nera da abbinare a ponti LP.
Guitar tuners TOP HARDWARE
Used on: TAOS, together with the Gotho Floyd	Meccanica Gotoh Finitura cosmo black
Used on: TAOS together with the Gotoh VG300	Meccanica Shaller Autobloccante Finitura Cromata

Meccaniche per basso STANDARD HARDWARE
Used on: Raven-Newport	Meccanica Manne cromata o nera Un buon compromesso tra il feel vintage e la costruzione moderna. rapporto 1:20
Meccaniche per basso TOP HARDWARE
Used on: MOAB-Acoustibass	Meccanica Shaller Nera Una delle migliori meccaniche in produzione. Precisa, affidabile e leggera